| |
 C.V.Axle |
| This is the optimum sliding joint for the drive shaft, of which such high performance is demanded… |
| |
| Outer C.V.Joint |
| This type of joint was invented in 1920 by a Dana engineer named Alfred H. Rzeppa… |
| |
| Inner C.V.Joint |
| Tripod joints do not have balls but instead use needle bearing rollers mounted on a three-legged spider… |
| |
| Components |
| Also called bellows, these are the protective rubber (synthetic or natural) or hard plastic… |
| |
|
 |
|
| |
 Components--List |
| We produce CV Boot,Car CV Boot,Our company is a specialized supplier and manufacturer of CV Boots,CV Boot in china.Our CV Boots sell well in the worldwide and enjoy good fame,If you are interested in any of CV Boots or your customers require to fill, please contact us right now! We will provide you with high-quality CV Boots and services. |
| |
 |
| Name: |
CV Boot |
| Class: |
Components |
Also called bellows, these are the protective rubber (synthetic or natural) or hard plastic (usually Hytrel) covers that surround CV joints. The boot's job is to keep grease in and dirt and water out. Split, torn or otherwise damaged boots should be replaced immediately. Old boots should never be reused when servicing a joint. Always install new boots.
The quality of rubber boots used in our products are strictly examined. They have to pass several tests so as to ensure the endurability. They can keep elastic under -38 degrees centigrade and also airproof, and also ensure no crack under 90 degrees centigrade. Still, they can resist corrosion from the grease contained.
|
|
| |
| |
| |
|
|
|
